| Application Modules |
| |
| ● Load Profile |
Load profile intervals can be setup to record energy consumption from
every 5 minutes to 60 minutes. This feature can be disabled if not required. |
| |
| ● Email Client |
Emails can be dispatched at the end of every load profile interval or
periodically over hours. In addition, the meter can be setup to send a report monthly, weekly or daily
on energy consumption and demand data. Each mail includes a report of the current demand, voltage,
amps and power factor by phase. |
| |
| ● FTP Client |
The FTP module operates similar to the email module. FTP, is designed to offer
load profile data with a summary of current consumption and demand data. Each ftp file
includes a report of the current demand, voltage, amps and power factor by phase. |
| |
| ● Web Server |
Energy consumption, demand and load profile data can be accessed directly using
the on board web server. The web server also allows you to configure mail, ftp, CT / PT ratios, Meter ID details, etc. |
| |
| ● DHCP |
The meter can be setup to automatically acquire a leased IP address from a DHCP server
or be set to a fixed IP address. |
| |
| ● SNTP |
The meter will automatically acquire the latest time from any SNTP server. Default
SNTP severs are provided but the user has the option to change them. This setup is done via the web server.
The SNTP server can be an Internet or local SNTP server. |
| |
| ● FTP Server |
The meter has a FTP server which is used to update new firmware released by Energy Tracking. |
| |
|
|
