In order to download the articles, you must logged in as a member. Please register here.
Energy Management
Power Quality standards
Power Quality Tutorials
Brief power quality tutorials for engineers 
-
-
-
Brief #3: Harmonics: Introduction to voltage and current harmonics issues
-
Brief #4: Flicker: Introduction to voltage flicker
-
-
Brief #6: Other disturbances: Frequency variations, noise bursts, and other less common problems
Sag immunity tutorials
- Tutorial #1: Common sources of voltage sags / dips
- Tutorial #2: Five ways equipment fails due to voltage sags
- Tutorial #3: Semiconductor industry voltage sag standards: F47 and F42
- Tutorial #4: Quick, inexpensive fixes that increase immunity to voltage sags
Infrared Technologies
-
Example of a loosely connected incoming power cable in a control panel.
-
Example of a catastrophic failure that might have been caused by a 150 HP Motor.
-
Example report on a typical Low-Voltage Transformer scan.
-
Example of a disconnected fuse clip of a compressor (Infrared Image Captured).
-
Example inspection report. (Infrared Image Captured). Moisture migration detected.
-
Example of a seriously loosed connection that might be potentially hazardous.
-
Example of another seriously loosed connection that might be potentially hazardous.
-
Example of several loosed and possibly worn bulb fuses that are dangerous.
UPS Technical Overview
About the Hybrid™ Rotary Uninterruptible Power Supply – Download
PSL Articles
Controller Video Tutorial
